H2OV Waterproof Case for ContourGPS

The H2OV Underwater Housing designed by GMSconcepts gives you the ability to take your ContourGPS Wearable Camcorder to deeper depths. The H2OV housing was designed for technical and recreational scuba diving. Pressure Tested to 400 ft. / 120 m.

The H2OV is a hand built custom housing, it is small and rugged and ideal for reef, wreck, or cave diving. Together with the ContourGPS camera, you get a point and shoot, wide angel video system that is easy to use and will capture all your dives in High Definition. Enjoy and experience your dive without the camera getting in the way.

The H2OV can be mounted to dive helmets, light systems, handle mounts, tanks, scooters, even your mask with the use of a Contour Goggle Mount and a simple conversion to remove the TRails. Each housing comes with a universal 1/4-20 mounting plate, extra O-rings, and a one year warranty.

The latches on the H2OV are spring loaded and include a safety catch to prevent accidental opening. Simply insert the camera with the power and record switch in the off position, and insert with the bottom of the camera facing the felt pads. The camera's small lanyard can be tucked along side the camera to allow room for the cover (the lanyard will also allow you to easily remove the camera from the housing). Inspect that the sealing surfaces are clean and free of any foreign particles. Place the cover on the housing making sure that it is seated properly. Set both latches loosely on the hooks of the cover then press down on both latches at the same time. Look to see that you have a good seal, you should see a solid black line on the o-ring.

To turn the camera on, firmly press the power control button on the back of the housing. To start recording, simply rotate the control knob clockwise. To stop recording, rotate the control knob counter clockwise.

Recommended Tripod Mounts